solid-state relay g3ne j-17 ssr solid-state relay g3ne compact, low-cost, ssr switching 5 to 20 a wide load voltage range: 75 to 264 vac. both 100-v and 200- v loads can be handled with the same model. dedicated, compact aluminum pcb and power elements used. built-in varistor effectively absorbs external surges. quick-connect #110 input terminals and #250 output connec- tions. ul, csa, and iec/en (t v) approval obtained for ? -us ? mod- els. ordering information list of models note: when ordering, specify the input voltage. accessories (order separately) heat sinks the following heat sinks are thin and can be din-track mounted. see dimensions for details. specifications ratings input note: each model has 5-vdc, 12-vdc, and 24-vdc input versions. isolation zero cross function indicator rated output load rated input voltage model phototriac yes no 5 a at 100 to 240 vac 5, 12, 24 vdc g3ne-205t g3ne-205t-us g3ne-205t-2-us 10 a at 100 to 240 vac g3ne-210t g3ne-210t-us g3ne-210t-2-us 20 a at 100 to 240 vac g3ne-220t g3ne-220t-us g3ne-220t-2-us no 5 a at 100 to 240 vac g3ne-205tl g3ne-205tl-us g3ne-205tl-2-us 10 a at 100 to 240 vac g3ne-210tl g3ne-210tl-us g3ne-210tl-2-us 20 a at 100 to 240 vac g3ne-220tl g3ne-220tl-us g3ne-220tl-2-us model applicable ssr y92b-n50 g3ne-205t(l)(-2)(-us)/-210t(l)(-2)(-us) y92b-n100 g3ne-220t(l)(-2)(-us) rated voltage operating voltage voltage level input impedance must operate must release with zero cross function without zero cross function 5 vdc 4 to 6 vdc 4 vdc max. 1 vdc min. 250 ? 20% 300 ? 20% 12 vdc 9.6 to 14.4 vdc 9.6 vdc max. 600 ? 20% 800 ? 20% 24 vdc 19.2 to 28.8 vdc 19.2 vdc max. 1.6 k ? 20%
j-18 solid-state relay g3ne output note: 1. the load current varies depending on the ambient temperature. refer to l oad current vs. ambient temperature under engineering data for details. 2. these values apply when using a dedicated radiator or a radiation plate of specified size. characteristics engineering data load current vs. ambient temperature model applicable load rated load voltage load voltage range load current (see note 1.) inrush current with heat sink without heat sink g3ne-205t(l)-(-2)(us) 100 to 240 vac 75 to 264 vac 0.1 to 5 a 0.1 to 5 a 60 a (60 hz, 1 cycle) g3ne-210t(l)-(-2)(us) 0.1 to 10 a (see note 2.) 0.1 to 5 a 150 a (60 hz, 1 cycle) g3ne-220t(l)-(-2)(us) 0.1 to 20 a (see note 2.) 0.1 to 5 a 220 a (60 hz, 1 cycle) item g3ne-2 @@ t-(-2)(us) g3ne-2 @@ tl-(-2)(us) operate time 1/2 of load power source cycle + 1 ms max. 1 ms max. release time 1/2 of load power source cycle + 1 ms max. output on voltage drop 1.6 v (rms) max. leakage current 2 ma max. (at 100 vac) 5 ma max. (at 200 vac) insulation resistance 100 m ? min. (at 500 vdc) dielectric strength 2,000 vac, 50/60 hz for 1 min vibration resistance destruction: 10 to 55 to 10 hz, 0.75-mm single amplitude (1.5-mm double amplitude) shock resistance destruction: 1,000 m/s 2 ambient temperature operating: ? 30 c to 80 c (with no icing or condensation) storage: ? 30 c to 100 c (with no icing or condensation) ambient humidity operating: 45% to 85% approved standards (only for -us models) ul508 file no.e64562/csa c22.2 (no.0, no.14) file no. lr35535 t v r9051064 (vde0435) (en60950) weight approx. 37 g g3ne-205t(l)-(-2)(us) g3ne-210t(l)-(-2)(us) g3ne-220t(l)-(-2)(us) ambient temperature ( c) ambient temperature ( c) ambient temperature ( c) load current (a) load current (a) load current (a) without heat sink without heat sink without heat sink with standard heat sink (y92b-n50) or aluminum plate measuring 100 mm x 100 mm x t2 mm (w x h x d) with standard heat sink (y92b-n100) or aluminum plate measuring 300 mm x 300 mm x t3 mm (w x h x d)
solid-state relay g3ne j-19 ssr inrush current resistivity: non-repetitive note: keep the inrush current to half the rated value if it occurs repetitively. dimensions note: all units are in millimeters unless otherwise indicated. g3ne-205t(l)-(-2)(us) g3ne-210t(l)-(-2)(us) g3ne-220t(l)-(-2)(us) inrush current (a. peak) energizing time (ms) inrush current (a. peak) energizing time (ms) inrush current (a. peak) energizing time (ms) 30 0.2 3 + 4 ? 1 2 14.5 6.5 7.1 2.9 7.95 3 6 30+0.5 g3ne-205t(l)/210t(l)/220t(l)-(-2)(us) mounting holes two, 3.5-dia. or m3 holes output load input 37.5 max. 3.5 dia. hole 11.5 max. * g3ne-2 @@ t(l)-2-us: two, #187 (t=0.5) (faston tab or equivalent) 47.5 max. two #110 (t = 0.5) (faston tab or equivalent)* two #250 (t = 0.8) (faston tab or equivalent) terminal arrangement/ internal connections (top view) input voltage load power supply 5.6 47.6 90 0.3 35 30.5 0.3 30 5 4.5 6 35 0.2 90 0.4 35 30.5 0.3 47.6 90 0.3 5.6 30 5 4.5 28 13 35 0.2 90 0.4 mounting holes y92b-n100 4.6 dia. hole two, m3 holes two, m4 holes 77 max. 100 max. 44 max. 47 max. 51 max. 4.6 dia. hole two, m3 holes 77 max. 100 max. 71 max. 100 max. 75 max. two, 3.2-dia. holes mounting holes weight: approx. 200 g weight: approx. 400 g heat sink y92b-n50 two, 3.2-dia. holes two, m4 holes two, 4.4-dia. or m4 holes two, 4.4-dia. or m4 holes
j-20 solid-state relay g3ne precautions refer to the technical information for ssrs (cat. no. j137) for gen- eral precautions. correct use do not apply excessive force to the terminals. exercise care when pulling or inserting the terminal clips for the quick connector (qc). when attaching a heat sink to the g3ne, in order to facilitate heat dissipation, apply heat conductive grease on the heat sink. tighten the mounting screws of the heat sink with a torque of 0.59 to 0.98 n m. in the interest of product improvement, specifications are subject to change without notice. all dimensions shown are in millimeters. to convert millimeters into inches, multiply by 0.03937. to convert grams into ounces, multiply by 0.03527. cat. no. k062-e1-03
|
